The soft wood dryer is a cylinder, its main body is a little bit slantwise, and the rotate speed can be adjusted within bounds. Wet raw materials are sent into cylinder, the materials are distributed evenly and dispersed after be turned over by shoveling plate, then the materials contact with the hot air fully, the drying is accelerated. Shoveling plate can be selected to meet different materials.
Biomass material: Sawdust, wood chips etc.
Powder & particle: Sands, limestone, stones, clay, mineral filter cake, coal, iron sulphate, filter cakes, fly ash, gypsum etc.
Damp and sticky material: Coal slime, sewage sludge, bentonite, Kaolin etc.
Corrosive material: Distillers 'grains, Fertilizer, animal dung, slag etc.
Model | Main Power (kw) | Blower Power (kw) | Cyclone Diameter (mm) | Evaporation (t/h) |
⌀1.2×12m | 5.5 | 5.5 | 1200 | 0.2-0.35 |
⌀1.5×12m | 7.5 | 15 | 1400 | 0.5-0.75 |
⌀1.5×15m | 11 | 18.5 | 1500 | 0.5-0.75 |
⌀1.6×18m | 15 | 22 | 1600 | 0.7-1 |
⌀1.8×15m | 15 | 22 | 1600 | 1-1.3 |
⌀1.8×18m | 15 | 22 | 1600 | 1-1.3 |
⌀2.0×20m | 18.5 | 30 | 1800 | 1.4-20 |
⌀2.0×24m | 18.5 | 30 | 1800 | 1.4-20 |
⌀2.2×24m | 18.5 | 30 | 1800 | 1.7-2 5 |
⌀2.4×24m | 22 | 37 | 1500×2 | 2.2-3.0 |
⌀2.8×24m | 30 | 55 | 1200×4 | 2.5-3.6 |